Michael Leatherman

Forum Replies Created

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • October 24, 2012 at 3:07 pm in reply to: pppd hangs on OCG-E G2 GP #4322
    Michael Leatherman
    Participant

    That seems to have done the trick. I’ve started it repeatedly about 10 times with no hangs.

    Thanks for the help.

    October 24, 2012 at 2:10 pm in reply to: pppd hangs on OCG-E G2 GP #4320
    Michael Leatherman
    Participant

    From minicom:

     

     

    AT&V

    Q:0 V:1 S0:000 S2:043 S3:013 S4:010 S5:008

    +CR:0 +CRC:0 +CMEE:0 +CBST:0,0,1

    +SPEAKER:1 +ECHO:0 &C:1 &D:2 %C:0

    +IPR:0 +ICF:3,4 +IFC:2,2

    OK

    October 24, 2012 at 12:20 pm in reply to: pppd hangs on OCG-E G2 GP #4318
    Michael Leatherman
    Participant

    I updated the gsm file to use 115200 as the baud rate and it’s working better so far. I’m getting disconnected by the remote peer every so often, but I’m not hanging.

    October 24, 2012 at 12:13 pm in reply to: pppd hangs on OCG-E G2 GP #4317
    Michael Leatherman
    Participant

    /etc/ppp/peers/gsm:

    linkname ppp0

    230400

    defaultroute

    replacedefaultroute

    usepeerdns

    ipcp-max-failure 4

    ipcp-restart 10

    noauth

    crtscts

    novj

    connect ‘/usr/sbin/chat -v -t 90 -f /etc/ppp/peers/gsm_chat’

    /etc/ppp/peers/gsm_chat:

    SAY “GSM chatn”

    ECHO OFF

    ABORT ‘NO DIAL TONE’

    ABORT ‘NO DIALTONE’

    ABORT ‘NO ANSWER’

    ABORT ‘NO CARRIER’

    ABORT ‘DELAYED’

    ABORT ‘VOICE’

    ABORT ‘BUSY’

    ” ‘AT’

    OK ‘ATZ’

    OK ‘AT+CSQ’

    #OK ‘AT+CGDCONT=1,”IP”,”proxy”‘

    #OK ‘AT+CGDCONT=1,”IP”,”ISP.CINGULAR”‘

    #OK ‘AT+CGDCONT=1,”IP”,”internet2.voicestream.com”‘

    #OK ‘AT+CGDCONT=1,”IP”,”internet”‘

    SAY “Dialing…n”

    #OK ‘ATD*99#’

    OK ‘ATD*99***1#’

    SAY “Waiting for CONNECT…n”

    TIMEOUT 120

    CONNECT ”

    SAY “Connectedn”

    /var/log/messages:

    Nov 11 00:44:05 mt100eocg daemon.notice pppd[361]: pppd 2.4.5 started by root, uid 0

    Nov 11 00:44:06 mt100eocg local2.info chat[365]: abort on (NO DIAL TONE)

    Nov 11 00:44:06 mt100eocg local2.info chat[365]: abort on (NO DIALTONE)

    Nov 11 00:44:06 mt100eocg local2.info chat[365]: abort on (NO ANSWER)

    Nov 11 00:44:06 mt100eocg local2.info chat[365]: abort on (NO CARRIER)

    Nov 11 00:44:06 mt100eocg local2.info chat[365]: abort on (DELAYED)

    Nov 11 00:44:06 mt100eocg local2.info chat[365]: abort on (VOICE)

    Nov 11 00:44:06 mt100eocg local2.info chat[365]: abort on (BUSY)

    Nov 11 00:44:06 mt100eocg local2.info chat[365]: send (AT^M)

    Nov 11 00:44:06 mt100eocg local2.info chat[365]: expect (OK)

    Nov 11 00:44:06 mt100eocg local2.info chat[365]: AT^M^M

    Nov 11 00:44:06 mt100eocg local2.info chat[365]: OK

    Nov 11 00:44:06 mt100eocg local2.info chat[365]: — got it

    Nov 11 00:44:06 mt100eocg local2.info chat[365]: send (ATZ^M)

    Nov 11 00:44:06 mt100eocg local2.info chat[365]: expect (OK)

    Nov 11 00:44:06 mt100eocg local2.info chat[365]: ^M

    Nov 11 00:44:06 mt100eocg local2.info chat[365]: ATZ^M^M

    Nov 11 00:44:06 mt100eocg local2.info chat[365]: OK

    Nov 11 00:44:06 mt100eocg local2.info chat[365]: — got it

    Nov 11 00:44:06 mt100eocg local2.info chat[365]: send (AT+CSQ^M)

    Nov 11 00:44:06 mt100eocg local2.info chat[365]: expect (OK)

    Nov 11 00:44:06 mt100eocg local2.info chat[365]: ^M

    Nov 11 00:44:06 mt100eocg local2.info chat[365]: AT+CSQ^M^M

    Nov 11 00:44:06 mt100eocg local2.info chat[365]: +CSQ: 6,1^M

    Nov 11 00:44:06 mt100eocg local2.info chat[365]: ^M

    Nov 11 00:44:06 mt100eocg local2.info chat[365]: OK

    Nov 11 00:44:06 mt100eocg local2.info chat[365]: — got it

    Nov 11 00:44:06 mt100eocg local2.info chat[365]: send (ATD*99***1#^M)

    Nov 11 00:44:07 mt100eocg local2.info chat[365]: timeout set to 120 seconds

    Nov 11 00:44:07 mt100eocg local2.info chat[365]: expect (CONNECT)

    Nov 11 00:44:07 mt100eocg local2.info chat[365]: ^M

    Nov 11 00:44:07 mt100eocg local2.info chat[365]: ATD*99***1#^M^M

    Nov 11 00:44:07 mt100eocg local2.info chat[365]: CONNECT

    Nov 11 00:44:07 mt100eocg local2.info chat[365]: — got it

    Nov 11 00:44:07 mt100eocg local2.info chat[365]: send (^M)

    Nov 11 00:44:07 mt100eocg daemon.info pppd[361]: Serial connection established.

    Nov 11 00:44:07 mt100eocg daemon.info pppd[361]: Using interface ppp0

    Nov 11 00:44:07 mt100eocg daemon.notice pppd[361]: Connect: ppp0 <–> /dev/ttyS1

    Nov 11 00:44:11 mt100eocg daemon.info pppd[361]: Remote message: Welcome!

    Nov 11 00:44:11 mt100eocg daemon.notice pppd[361]: PAP authentication succeeded

    Nov 11 00:44:11 mt100eocg daemon.warn pppd[361]: kernel does not support PPP filtering

    Nov 11 00:44:11 mt100eocg daemon.notice pppd[361]: local IP address 32.178.80.137

    Nov 11 00:44:11 mt100eocg daemon.notice pppd[361]: remote IP address 192.168.111.111

    Nov 11 00:44:11 mt100eocg daemon.notice pppd[361]: primary DNS address 209.183.33.23

    Nov 11 00:44:11 mt100eocg daemon.notice pppd[361]: secondary DNS address 209.183.35.23

    Nov 11 00:44:24 mt100eocg daemon.info pppd[361]: Terminating on signal 2

    Nov 11 00:44:24 mt100eocg daemon.info pppd[361]: Connect time 0.3 minutes.

    Nov 11 00:44:24 mt100eocg daemon.info pppd[361]: Sent 0 bytes, received 0 bytes.

    Nov 11 00:44:24 mt100eocg daemon.notice pppd[361]: Connection terminated.

    Nov 11 00:44:25 mt100eocg daemon.info pppd[361]: Exit.

    Nov 11 00:44:28 mt100eocg daemon.notice pppd[394]: pppd 2.4.5 started by root, uid 0

    Nov 11 00:44:29 mt100eocg local2.info chat[398]: abort on (NO DIAL TONE)

    Nov 11 00:44:29 mt100eocg local2.info chat[398]: abort on (NO DIALTONE)

    Nov 11 00:44:29 mt100eocg local2.info chat[398]: abort on (NO ANSWER)

    Nov 11 00:44:29 mt100eocg local2.info chat[398]: abort on (NO CARRIER)

    Nov 11 00:44:29 mt100eocg local2.info chat[398]: abort on (DELAYED)

    Nov 11 00:44:29 mt100eocg local2.info chat[398]: abort on (VOICE)

    Nov 11 00:44:29 mt100eocg local2.info chat[398]: abort on (BUSY)

    Nov 11 00:44:29 mt100eocg local2.info chat[398]: send (AT^M)

    Nov 11 00:44:29 mt100eocg local2.info chat[398]: expect (OK)

    Nov 11 00:44:29 mt100eocg local2.info chat[398]: ^M

    Nov 11 00:44:29 mt100eocg local2.info chat[398]: OK

    Nov 11 00:44:29 mt100eocg local2.info chat[398]: — got it

    Nov 11 00:44:29 mt100eocg local2.info chat[398]: send (ATZ^M)

    Nov 11 00:44:29 mt100eocg local2.info chat[398]: expect (OK)

    Nov 11 00:44:29 mt100eocg local2.info chat[398]: HxAT^M^M

    Nov 11 00:44:29 mt100eocg local2.info chat[398]: OK

    Nov 11 00:44:29 mt100eocg local2.info chat[398]: — got it

    Nov 11 00:44:29 mt100eocg local2.info chat[398]: send (AT+CSQ^M)

    Nov 11 00:44:29 mt100eocg local2.info chat[398]: expect (OK)

    Nov 11 00:44:29 mt100eocg local2.info chat[398]: ^M

    Nov 11 00:44:29 mt100eocg local2.info chat[398]: ATZ^MAT+CSQ^M^M

    Nov 11 00:44:29 mt100eocg local2.info chat[398]: OK

    Nov 11 00:44:29 mt100eocg local2.info chat[398]: — got it

    Nov 11 00:44:29 mt100eocg local2.info chat[398]: send (ATD*99***1#^M)

    Nov 11 00:44:29 mt100eocg local2.info chat[398]: timeout set to 120 seconds

    Nov 11 00:44:29 mt100eocg local2.info chat[398]: expect (CONNECT)

    Nov 11 00:44:29 mt100eocg local2.info chat[398]: ^M

    Nov 11 00:44:29 mt100eocg local2.info chat[398]: AT^M

    Nov 11 00:44:29 mt100eocg local2.info chat[398]: +CSQ: 6,1^M

    Nov 11 00:44:29 mt100eocg local2.info chat[398]: ^M

    Nov 11 00:44:29 mt100eocg local2.info chat[398]: OK^M

    Nov 11 00:46:29 mt100eocg local2.info chat[398]: alarm

    Nov 11 00:46:29 mt100eocg local2.info chat[398]: Failed

    Nov 11 00:46:29 mt100eocg daemon.err pppd[394]: Connect script failed

    Nov 11 00:46:30 mt100eocg daemon.info pppd[394]: Exit.

    Nov 11 00:46:34 mt100eocg daemon.notice pppd[399]: pppd 2.4.5 started by root, uid 0

    Nov 11 00:46:35 mt100eocg local2.info chat[403]: abort on (NO DIAL TONE)

    Nov 11 00:46:35 mt100eocg local2.info chat[403]: abort on (NO DIALTONE)

    Nov 11 00:46:35 mt100eocg local2.info chat[403]: abort on (NO ANSWER)

    Nov 11 00:46:35 mt100eocg local2.info chat[403]: abort on (NO CARRIER)

    Nov 11 00:46:35 mt100eocg local2.info chat[403]: abort on (DELAYED)

    Nov 11 00:46:35 mt100eocg local2.info chat[403]: abort on (VOICE)

    Nov 11 00:46:35 mt100eocg local2.info chat[403]: abort on (BUSY)

    Nov 11 00:46:35 mt100eocg local2.info chat[403]: send (AT^M)

    Nov 11 00:46:35 mt100eocg local2.info chat[403]: expect (OK)

    Nov 11 00:48:05 mt100eocg local2.info chat[403]: alarm

    Nov 11 00:48:05 mt100eocg local2.info chat[403]: Failed

    Nov 11 00:48:05 mt100eocg daemon.err pppd[399]: Connect script failed

    Nov 11 00:48:06 mt100eocg daemon.info pppd[399]: Exit.

    stdout:

    # pppd call gsm nodetach nopersist

    GSM chat

    Dialing…

    Waiting for CONNECT…

    Connected

    Serial connection established.

    Using interface ppp0

    Connect: ppp0 <–> /dev/ttyS1

    Remote message: Welcome!

    PAP authentication succeeded

    kernel does not support PPP filtering

    local IP address 32.178.80.137

    remote IP address 192.168.111.111

    primary DNS address 209.183.33.23

    secondary DNS address 209.183.35.23

    Terminating on signal 2

    Connect time 0.3 minutes.

    Sent 0 bytes, received 0 bytes.

    Connection terminated.

    # pppd call gsm nodetach nopersist

    GSM chat

    Dialing…

    Waiting for CONNECT…

    Connect script failed

    # pppd call gsm nodetach nopersist

    GSM chat

    Connect script failed

    #

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)