[Michael Fokin]

Should I talk to My FAE or support?

[Michael Fokin]

Thank you Steve,

I had to use another mDot provided with the kit because I could not put mBox into the command mode so AT+JOIN was returning error.
Please see my results with new mDot they are about 1-1.5m away without antennas:

at+rssi
-125, -125, 0, -119

OK
at+ping
-119,-4.8

OK
at+rssi
-125, -125, 0, -119

OK
at+ping
-119,-4.2

OK
at+rssi
-124, -125, 0, -119

OK
at+ping
-118,-4.8

OK
at+rssi
-124, -125, 0, -119

OK
at+ping
-120,-4.5

OK
at+rssi
-124, -125, 0, -119

OK
at+ping
-120,-5.0

OK

https://www.screencast.com/t/3KzIcGw0tj

• This reply was modified 8 years, 1 month ago by Michael Fokin.

[Michael Fokin]

Thank you, Steve

That worked like a charm. I get all the data and I can see it in IBM’s Bluemix

Now I just have to fight the range, but that is another subject

LoRa Range question.

[Michael Fokin]

Thank you so much for your reply, I’ve spend some time with it and factory reset it couple times to get the WAN going. My Node-Red’s visual designer was absolutely empty when I got into it for a first time. Do you have a configuration template for the IBM Bluemix connection?

Also is there a document for the packet structure for the payload transmitted?
https://www.screencast.com/t/3mLTtRn8l – my packet with payload of unexpected token.

the serial is 00-08-00-4A-11-EC
https://quickstart.internetofthings.ibmcloud.com/#/device/00-08-00-4A-11-EC/sensor/

• This reply was modified 8 years, 1 month ago by Michael Fokin.

[Author]

Posts