Fred

Forum Replies Created

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • August 17, 2021 at 10:10 am in reply to: MTCDT-LEU1 #32027
    Fred
    Participant

    Ok so it’s not possible to configure the gateway without lan connection

    Thank for your help

    Regards

    August 17, 2021 at 9:58 am in reply to: MTCDT-LEU1 #32025
    Fred
    Participant

    Hi Steve,

    Cellular (ppp0)
    State
    PPP Link is up
    Connection Mode
    PPP
    Cellular Mode
    LTE
    Mode
    PPP
    Signal
    Connected
    00:15:55
    IPv4 Address
    10.12.245.242
    DNS
    192.168.10.110
    Roaming
    No

    ICMP via WAN is active and ping doesn’t work

    Regards

    August 17, 2021 at 9:35 am in reply to: MTCDT-LEU1 #32022
    Fred
    Participant

    Hi Steve,
    Thank for your response but i doesn’t work (PPP Link is up and i have an ip address v4 and i see it on DeviceHQ portal).

    Do you have a another solution ?

    Thanks

    • This reply was modified 3 years, 7 months ago by Fred.
    February 3, 2021 at 1:43 am in reply to: SMTP Configuration #31564
    Fred
    Participant

    Hello Mike,

    Thank for your help.

    This is what I did, I changed my Gmail account to allow less secure devices / apps but it doesn’t work. Regarding the certificates I don’t see how to do it.

    Regards,
    Fred

    December 6, 2020 at 4:25 am in reply to: Downlink queue post command do nothing #31401
    Fred
    Participant

    I try your solution but i have a another problem

    curl -v “https://192.168.1.100/api/lora/packet/queue” -X POST -H “Content-Type:application/json” -d ‘{“deveui”:”33-39-34-36-72-36-83-03″,”data”:”AQECAAAA”,”port”:”1″}’
    Note: Unnecessary use of -X or –request, POST is already inferred.
    * Trying 192.168.1.100…
    * TCP_NODELAY set
    * Connected to 192.168.1.100 (192.168.1.100) port 443 (#0)
    * schannel: SSL/TLS connection with 192.168.1.100 port 443 (step 1/3)
    * schannel: checking server certificate revocation
    * schannel: using IP address, SNI is not supported by OS.
    * schannel: sending initial handshake data: sending 162 bytes…
    * schannel: sent initial handshake data: sent 162 bytes
    * schannel: SSL/TLS connection with 192.168.1.100 port 443 (step 2/3)
    * schannel: failed to receive handshake, need more data
    * schannel: SSL/TLS connection with 192.168.1.100 port 443 (step 2/3)
    * schannel: encrypted data got 1317
    * schannel: encrypted data buffer: offset 1317 length 4096
    * schannel: next InitializeSecurityContext failed: SEC_E_UNTRUSTED_ROOT (0x80090325) – La chaîne de certificats a été fournie par une autorité qui n’est pas approuvée.
    * Closing connection 0
    * schannel: shutting down SSL/TLS connection with 192.168.1.100 port 443
    * schannel: clear security context handle
    curl: (77) schannel: next InitializeSecurityContext failed: SEC_E_UNTRUSTED_ROOT (0x80090325) – La chaîne de certificats a été fournie par une autorité qui n’est pas approuvée.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)