WAN Failover how to stop
- This topic has 1 reply, 2 voices, and was last updated 6 years, 2 months ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.
Home › Forums › Conduit: AEP Model › WAN Failover how to stop
Jeff Hatch.
Lawrence GriffithsI have Cell conduit which uses Ethernet I don’t need or want Failover.
I can find a way to change WAN from Failover to CONSTANT.
I’ve set both ETHERNET & CELLULAR to passive and save & restarted no change in failover!
My issue is on the site it’s installed I occasionally ETHERNET and the Conduit hangs as it’s Failing over to an non existing CELLULAR connection!
Lawrence
Jeff HatchLawrence,
As far as I know, the mode on Conduit is always FAILOVER. I don’t think that CONSTANT is an option anywhere that is configurable.
If Ethernet is not enabled as WAN, ie. on the Network Interfaces Configuration, eth0 is configured as LAN for the Direction setting, it should not be able to fail over to Ethernet. If this is the configuration you have, then I am not sure what is “hanging” your Ethernet connection other than possibly the routing tables are being rewritten. Is the Cellular interface a higher priority than WAN Ethernet? If that is the case, then it will definitely try to find a Cellular interface, however, I am not sure that the wan manager code actually tries to fail over if ppp0 doesn’t exist.
Jeff