Using TTNmapper with MultiConnect® mDot™ Box

Home › Forums › mDot/xDot › Using TTNmapper with MultiConnect® mDot™ Box

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • March 19, 2017 at 1:40 pm #17882
    Klaus Wilting
    Participant

    I want to use the MultiConnect® mDot™ Box for site surveying my TTN Gateway with http://ttnmapper.org

    For this, HDOP and altitude values of GPS are missing in “Site Survey GPS” mode of the box.

    Is there a way to modify the original firmware of the mDot Box to include both values in site survey mode, sending them in payload to the gateway?

    March 20, 2017 at 7:50 am #17885
    Jason Reiss
    Keymaster

    Application source code for MTDOT EVB can be found here on mbed.
    https://developer.mbed.org/platforms/mdotevb/

    March 23, 2017 at 3:37 pm #17974
    Klaus Wilting
    Participant

    after i flashed my MTDOT box with compiled code, the inital settings, i.e. the DEVEUI, are missing.

    AT+DI=00:80:00:00:00:12:34:56 does not works, reports invalid arguments.

    How can i restore or renew the device settings?

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.