USB Driver Issues MTQ-H5-B01

Home › Forums › Dragonfly › USB Driver Issues MTQ-H5-B01

Tagged: , ,

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • April 5, 2018 at 1:27 pm #23020
    Christopher Shontell
    Participant

    I’ve been attempting to install USB Drivers for my MTQ-H5-B01 on Windows 10 for some time now. I’ve followed the steps outlined in the “USB Installation Guide for H5 Devices” manual properly, and all the proper devices show up in Device Manager. However, the Drangonfly does not appear as a USB storage device as it should to be programmed through Mbed. It’s worth noting that the manual notes support with Windows XP up to Windows 8, but makes no mention of Windows 10.

    Has anyone had experience trying to get these drivers up and running on Windows 10, or should I just bite the bullet and get a Virtual Machine going to be able to interface with my Dragonfly?

    April 5, 2018 at 3:21 pm #23021
    Steve Kovarik
    Moderator

    Hi Christopher

    You will need to install the MTQ-H5-B01 into a MultiTech Developer Board
    model MTUDK2-ST-CELL to have the Dragonfly show up as a USB storage device.
    The MTUDK2-ST-CELL allows you to plug in the communications device and use
    it for testing, programming and evaluation.

    https://www.multitech.com/brands/socketmodem-dragonfly-dev-kit

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.