RTC initialization failed

Home › Forums › mDot/xDot › RTC initialization failed

Tagged: , , ,

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • May 26, 2016 at 11:54 am #12756
    Michael
    Participant

    Using mDot on a UDK board.

    I updated my mbed and mbed-rtos libraries and now I get this error on my debug output:

    “RTC initialization failed”

    May 27, 2016 at 8:47 am #12763
    Michael
    Participant

    Anyone?

    This error seems to come and go in different builds. I haven’t been able to track it down.

    Only started happening after I did some updates to the mdot, mbed libmdot libraries

    May 27, 2016 at 8:50 am #12764
    Michael
    Participant

    I also see this outputted on the debug port:

    “SPIFFS_write failed -10015”

    May 27, 2016 at 8:52 am #12765
    Jason Reiss
    Keymaster

    I have seen it as well occasionally after flashing the unit with new firmware. A power cycle rather than reset will allow the RTC to be initialized.

    May 27, 2016 at 8:56 am #12767
    Michael
    Participant

    Tried the power cycle but the SPIFFS error remains

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.