MultiTech Modems

Home › Forums › General › MultiTech Modems

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • December 5, 2015 at 3:51 pm #10192
    David Camp
    Participant

    This forum does not list the modem I have “Mtc-c2-B06-N3”

    But I thought I would ask here anyway.

    Can you turn the “Response code” OFF so the modem does NOT answer back the command.

    This should make the modem a little faster when talking with my PLC through the RS232 Port.

    Thanks

    December 9, 2015 at 10:26 am #10210
    Darrik Spaude
    Keymaster

    Hi David,

    I recommend that you take a look at the AT command guide found on the page for your product:

    http://www.multitech.com/models/92506902LF

    Take a look at the section on “DTE Modem Interface Control” (starting on page 35). ATQ0 would “quiet result codes.” ATE0 would disable echo. ATV0 would use terse responses rather than verbose responses.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.