mDot Configuration

Home › Forums › mDot/xDot › mDot Configuration

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • July 9, 2018 at 3:52 pm #25606
    tweety.dayanna@hotmail.com
    Participant

    Hi, I’m trying to understand all the posible forms of configuration for a mDot.
    I know that:
    **Activation mode: OTAA and ABP.
    **End-device class: A and C.
    **Network mode in gateway Conduit: Public LoRaWAN, Private LoRaWAN and Private MTS.
    **Configuration tool: AT Commands and mbed.
    How are these things related? Is it possible to have a mDot with OTAA, class C, Private LoRaWAN and configured by AT Commands?

    Thanks

    July 10, 2018 at 9:59 am #25611
    Ryan Klaassen
    Blocked

    Configuration can be done using at commands.
    Activation mode is at+njm=2 for auto ota
    Device class is at+dc=c for class c
    Network mode is at+pn=2 for private

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.