LoRa version on Conduit?
- This topic has 1 reply, 2 voices, and was last updated 6 years, 8 months ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.
Jason Reiss.
andrew@bitfinder.coDoes the Conduit (or rather, the LoRa card internally) target a specific verison of the LoRa spec?
There seems to be a fair amount of motion, both in terms of the spec, the available implementation, and the regulatory domain.
I am adapting a Murata module to work with the Conduit, and ST/Murata/Semtech recently put out a newer version of the MAC implementation targetting the 1.1.x spec.
As far as I understand it, there are some differences between the 1.1.x spec and 1.0.x spec that would have functional effects, so I need to know which version to target for my device.
Jason ReissThe network server in Conduit implements LoRaWAN 1.0.2.
The MTAC-LORA will work with either, it is configured with a set of channels to listen to.
A LoRaWAN 1.1 end-device should be able to connect to a 1.0.2 network server and vice versa. The version is negotiated during OTA join.