Login incorrect
- This topic has 1 reply, 2 voices, and was last updated 6 years, 5 months ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
mLinux factory default settings does not include passwords, unless you write your own code.
root/root are the default settings for mLinux, but if you build your own image, the password is found in password.txt in the build directory.
If you cannot log in, you could re-flash your Conduit using U-Boot and tftp.
See Using U-boot & TFTP:
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.