json config for Packe forwarding

Home › Forums › Conduit: AEP Model › json config for Packe forwarding

Tagged: 

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • March 7, 2016 at 1:29 pm #11843
    Terrence Spencer
    Participant

    I could have swarn that when I did my initial setup of my AEP that the json config automatically was filled in the text box when I flipped the ddl to PacketForwarding.

    Am I remembering wrong? IF not, I have reset the aep (30 sec hold) to factory default and the text box is always empty.

    Thank you for setting my memory straight.

    March 7, 2016 at 3:40 pm #11844
    Jason Reiss
    Keymaster

    Default is empty. Maybe you had switched back and forth? The setting will stay if you choose the local network server.

    Sample configurations to connect to Semtech demo site are here:
    http://www.multitech.net/developer/software/aep/aep-lora-packet-forwarder/

    March 7, 2016 at 3:53 pm #11845
    Terrence Spencer
    Participant

    Jason, thanks.
    I am sending data to TheThingsNetwork
    I know the items in GetWayConf section are different, is there anything different about the SX1301_conf when sending to TTN?

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.