AU915 firmware for MTDOT

Home › Forums › mDot/xDot › AU915 firmware for MTDOT

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • January 13, 2017 at 12:47 am #16306
    John Judge
    Participant

    Where can I find a copy of the latest AT Command firmware for the MTDOT supporting AU915. The Changelog for the 2.0.15 firmware says “AU915 Support according to LoRaWAN 1.0.1” but installing (2.0.16) on the board shows US915 (in response to AT+FREQ) with no option to change it.

    January 13, 2017 at 8:12 am #16312
    Mike Fiore
    Blocked

    John,

    If you ordered a US915 MTDOT, you’re not normally able to change it to AU915. The Frequency Band setting is saved in the MTDOT’s configuration and is not normally controlled by the firmware.

    Please open a case at http://support.multitech.com to get assistance.

    Cheers,
    Mike

    January 23, 2017 at 7:02 pm #16447
    Grant Faber
    Participant

    There’s a AU915 firmware that sets the sub bands to a higher range for the Aus market. I’m running 1.0.8-AU915 on mine and they work fine. I don’t think it matters if you have a US915 or AU915 mdot, its the same thing bar the difference in FSB range.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.