• Home
  • Privacy Statement
  • Terms of Use
  • Sitemap
  • News
  • Products
    • Conduit Platform
      • Conduit 300
      • mCard Accessory Cards
        • Installing an mCard Accessory Card
        • MTAC-XDOT
          • xdot-util script
          • MTS-IO-SYSFS
        • MTAC-GPIO
          • MTAC-GPIO Electrical Requirements
          • MTAC-GPIO Connector and Cable Pinout
          • MTAC-GPIO Mechanical Drawing
          • MTAC-GPIO Hardware Specifications
          • MTAC-GPIO Power Draw
          • MTAC-GPIO LED Descriptions
          • MTAC-GPIO Regulatory Information
        • MTAC-MFSER
          • MTAC-MFSER Connector Pinout and LEDs
          • MTAC-MFSER-DTE Mechanical Drawing
          • MTAC-MFSER-DCE Mechanical Drawing
          • MTAC-MFSER Hardware Specifications
          • MTAC-MFSER Power Draw
          • MTAC-MFSER Regulatory Information
        • MTAC-LoRa Cards
          • MTAC-LoRa Antenna Specifications and Connector
          • MTAC-LoRa Cards Mechanical Drawing
          • MTAC-LORA Power Draw
          • MTAC-LoRa Hardware Specifications
          • MTAC-LoRa Regulatory Information
          • MTAC LoRa-H Regulatory Information
        • MTAC-003 (LoRa 3) Card
        • MTAC-ETH
          • Getting Started with MTAC-ETH card
          • MTAC-ETH Connector
          • MTAC-ETH Mechanical Drawing
          • MTAC-ETH Hardware Specifications
          • MTAC-ETH Power Draw
          • MTAC-ETH Regulatory Information
        • Electromechanical Specifications
      • Conduit
        • Micro SD Card Details
      • Conduit IP67 Base Station
        • Updated LED Information
        • Antenna Bracket (Optional)
        • Alternate LoRa Antenna
      • L4E1 Cellular Radio Firmware Update
    • Conduit Base Station and Conduit Base Station Series 200
    • Conduit AP
    • mDots and xDots
      • xDot
      • mDot
      • mDot Box & EVB (MTDOT-BOX/EVB)
        • Internal Sensors
    • SocketModem MTQ and MTQN
      • SocketModem MTQ
      • SocketModem MTQN
    • MultiConnect OCG
      • MultiConnect OCG-D
        • Installing a SIM Card
        • Removing a SIM Card
        • MTCDP I/O Control using mts-io
        • GPIO Connector and Cable information
        • GPIO Interface Electrical Requirements
        • Regulatory Info for OCG-D
          • Frequency Bands for MultiConnect-OCG-D
          • Max radio frequency power for MultiConnect-OCG-D
          • Safety Notices for OCG-D
      • MultiConnect OCG-E
        • MT100EOCG I/O Control using mts-io
        • Hardware Specifications
        • MultiConnect OCG-E with MTPCIE
          • Configuring the MTPCIE-DK1 Developer Board
          • Calibrating Wi-Fi and Programming the MAC Address
          • Creating a PPP Connection
          • Setting Wi-Fi Access Point with an MT100EOCG and an MTPCIE Bluetooth/Wi-Fi
          • Using an MT100EOCG with an MTPCIE Bluetooth/Wi-Fi Device as Wi-Fi
          • Setting up Bluetooth with an MT100 EOCG and an MTPCIE
          • Setting up an External USB to MTPCIE Bluetooth Serial Interface
      • MultiConnect OCG Break-Out Board
      • Cables
        • Serial Debug Cable Diagram
        • How to Setup Serial Console Cable
  • Software
    • DeviceHQ
      • Account API
        • Account API – Format
        • Account API – Authentication
        • Account API – Routes
        • Account API – Search and Pagination
        • Account API – HTTP Codes
        • Account API – Examples
          • Example – Test
          • Example – Info
          • Example – Account
          • Example – Users
          • Example – Devices
          • Example – Update a Device
          • Example – Network
          • Example – Signal Strength History
          • Example – Check-in History
          • Example – LoRa Network
          • Example – Logs
          • Example – Configs
          • Example – Register
      • Account API Extensions for Task Management
        • New End Points
        • Examples
        • Detailed Request Examples
          • Create an Install App Task
          • Create an Install App Task on a Device, Specifying App Version
          • Create an Install App Task on a Device, Specifying App Version and Configuration
          • Create an Uninstall App Task on a Device
          • Create an Upgrade Firmware Task on a Device
          • Create an Upgrade Radio Firmware Task on a Device
          • Create an Apply Configuration Task on a Device
          • Create an Apply App Configuration Task on a Device
          • Retrieve Detailed Information about a Single Task on a Device
          • Cancel a Task Created for a Device
          • Delete a Task on a Device
          • Retrieve Detailed Information about Apps Installed on a Device
          • Retrieve Detailed App Information
          • Retrieve Tasks for a Device
          • Retrieve a List of Apps Belonging to Your Account
          • Retrieve a List of Device Firmwares that are Public or Belong to Your Account
          • Retrieve a List of Radio Firmwares that are Public or Belong to Your Account
          • Retrieve a List of Device Configurations Belonging to Your Account
        • Error Responses
    • mPower
      • LoRa Configuration
        • LoRaWAN Device Provisioning
      • Configurations for mPower
      • Reset Button Behavior for mPower
      • Call Home Remote Management
      • Creating a Custom Application
        • Development Tools and Tips
        • Production Deployment
        • manifest.json Details
        • p_manifest.json Details
        • Install Script
        • Start Script
        • status.json Details
      • Conduit mPower API
      • How to Create Certificates and CA Certificates
      • Connect Node-RED to Any Cloud Service’s REST API
      • Updating Packages
      • UE Mode of Operation (CEMODE) issue for AT&T
      • mPower Firmware Changelog
      • mPower Resolutions
    • mLinux
      • About mLinux
      • Getting Started with mLinux
        • Commissioning for mLinux Devices
      • Configure Modes
      • Upgrading mLinux
      • Using mLinux
        • Flashing mLinux Firmware
        • Setting administrative passwords
        • Log in as Admin Post-Production
        • Changing the password
        • Sudoers file
        • Naming the Device
        • LoRa Configuration
        • Upgrade LoRa Server & Packet Forwarder
        • Cellular Connection
          • LSP3 device (Sprint LTE) activation
        • Configure monit for pppd and lora-packet-forwarder
        • Start Cell Connection on Boot
        • OPKG Package Manager
        • Enabling Receive Diversity on MTCDT-H5
        • Hardware I/O Usage
        • Using Accessory Cards with mLinux
          • MTAC-GPIO Usage
          • MTAC-MFSER Usage
          • MTAC-LORA/MTAC-003 Usage
          • MTAC-ETH Usage
        • bluez5 PAN Setup
        • bluez5 Serial Setup
        • Pairing
        • Bluetooth
        • Bluetooth Low Energy
        • GPS/GNSS
        • NTPD
        • GPSD
        • Wi-Fi Access Point
        • Wi-Fi Station
        • Ethernet Bonding
        • Included Software Utilities
          • DHCP & Router Scripts
          • I/O Control Using mts-io
          • SMS Messaging Using sms-utils
          • radio-query Usage
          • radio-cmd Usage
          • U-boot Linux Utility
        • Reset for mLinux (Factory Defaults or Reboot)
        • Php-fpm (New fast CGI server)
        • Ethernet Hotplug
        • mLinux glossary
        • Using LXFP to Upgrade Telit Firmware
        • Using UXFP to Upgrade Telit Firmware
        • Supercap Feature
      • Application Development
        • C/C++ Toolchain
        • Python
        • Node.js Examples
        • Debugging a C/C++ Application
      • Getting Started with MTCDT-246L (using mLinux)
      • Building Images
        • Introduction to Yocto Project
        • Building a Custom Linux Image
        • Using OPKG with mLinux
      • mLinux Changelog
      • LoRa Network Server Changelog
      • mLinux Resolutions
    • mDot
      • Flashing mDot Firmware
      • Peer-to-Peer
      • AT Command Getting Started Guide
      • Connecting to a Network
      • Network Join Modes
    • mPower Software
      • MTR, Conduit, and Conduit 300 API Reference
        • Requests
          • Making Requests
            • Verify the Hardware Version
            • Confirm the Current State of DHCP
            • Retrieving the Current DHCP Setting
            • Using HTTP to Send SMS
            • Find the IP Address of a Remote End Point
            • Retrieving SMS messages
          • Logging In
            • Specifying Credentials When Logging In
          • Logging Out
          • Commissioning
          • Retrieving Session Information with the whoami Command
          • Passing JSON Data
          • Saving Changes
          • Selecting a Version of an API Call
          • Element Descriptions
          • URI Parameters
          • Firewall Summary
          • CA Certificates
        • Responses
          • Success Responses
          • Error Responses
        • Collection Endpoints
          • apps
          • appStore
          • alert
          • autoReboot
          • autoDialout
          • backOffTimers
          • battery
          • bluetooth
          • bluetoothLowEnergy
          • bootloader
          • brand
          • btDevices
          • cacertificates
          • callHome
          • cellTimeSync
          • certificate
          • customApps
          • customAppsConfig
          • ddns
          • devices
          • dhcp
          • dns
          • docker
          • filters
          • firewall
          • gps
          • greTunnels
          • ipPipes
          • ipsecTunnels
          • lan
          • lldp
          • log
          • lora
          • loraNetwork
          • MQTT broker
            • MQTT bridge
          • nat
          • ni
          • nodeRed
          • ovpn
          • packages
          • passwordComplexityRules
          • policy
          • ppp
          • radius
          • remoteAccess
          • resetButton
          • remoteManagement
          • routes
          • saveAndRestore
          • scada – BACnet
          • secureProtocols
          • selfDiagnostic
          • serial
          • serialModemPassthrough
          • sms
          • smtp
          • snmp
          • sntp
          • syslog
          • system
          • trustedIp
          • users
          • waninfo
          • wanmngr
          • wifi
        • Commands
          • passwd
          • Radio
        • Statistics
          • dns
          • eth
          • bluetooth
          • remoteManagement
          • ethHistory
          • ethTotal
          • gps
          • gre
          • ipsec
          • lan
          • modbus
          • ppp
          • pppHistory
          • pppTotal
          • radio
          • serial
          • service
          • status
          • wlan
          • wlanHistory
          • wlanTotal
        • Appendix
          • Using curl for Commissioning
          • Using Curl to Log In
          • Using Curl to Enable PPP
          • Using Curl to Save the Current Configurations and Reboot
          • Using Curl to Add a Firewall DNAT Rule
          • Using Curl to Add a Firewall Filter Rule
          • Using Curl to Delete a Firewall Filter Rule by Name
          • Using Curl to Delete a Firewall Filter Rule by Index
          • Using Curl to Send an SMS
          • Using Curl to Delete an SMS
          • Using wget to Send SMS
          • Using Curl to Manage CA certificates
          • Using Curl to Manage Telit Radio Firmware Upgrade
          • Using Curl to Upload and Check Firmware Upgrade File
          • Find out the Hardware Version
        • API Changes
      • Modbus Query Information
    • mDot Box/EVB
      • Device Startup
      • View Data
      • Select Region
      • LoRa Demo
      • Configuration Mode
      • Survey Single
      • Survey Sweep
      • Survey GPS
      • Survey Data File
      • Data Packet Format
      • Update firmware using binary file
      • Glossary
    • LoRa
      • Introduction to LoRa
      • Listen Before Talk
      • Spectral Scan
      • Configuring Two LoRa Cards on a Conduit
      • Class C Walkthrough
      • Glossary
      • Running Basic Station on Conduit
      • LoRaWAN Multicast Setup and Firmware Updates OTA
      • MTAC-LORA-2G4-3
      • Installing Chirpstack Bridge
      • Cloud Connector
      • Packet Filtering
      • LoRa Network Server
        • MQTT Messages
        • Networking Conduits
      • Conduit mPower: LoRa Communication and Node-RED
        • Conduit AEP: Advanced LoRa Configuration
        • Conduit AEP: LoRa Use With Third-Party Devices
      • Conduit AEP: Convert to Basic Packet Forwarder
      • Getting Started with LoRa Conduit AEP (LoRa Configuration)
        • Managing device list through API
      • Getting Started with LoRa Conduit mLinux (LoRa Configuration)
      • Conduit mLinux: LoRa Communication
        • Conduit mLinux: Advanced LoRa Configuration
        • Conduit mLinux: LoRa Use With Third-Party Devices
      • Conduit mLinux: Convert to Basic Packet Forwarder
      • Conduit mLinux: Configure for The Things Network
      • Troubleshooting LoRa Communication
      • Conduit Access Point: Getting Started with LoRa
      • LoRa Resolutions
    • SocketModem MTQ
      • Flashing MTQ Firmware
    • CoreCDP
      • Prerequisites
      • Getting Started
      • Application Development
        • Using BitBake
        • NAND Flash Programming
        • Development Examples
        • Accessing Hardware Interfaces
        • Creating a Custom Image
        • Writing BitBake Recipes
        • Customizing Bitbake Recipes
        • Setting Up a Package Feed
      • Technical Articles
        • I/O Control using mts-io Package
        • Setting the Time Zone, Date, and Time
        • Command-line Utility for GPS
        • Improving SD card performance
        • OCG Scripts
        • PPP Masquerading and Firewalling
        • Establishing a Cellular Data (PPP) Connection
        • GPS Receiver Overview
        • SMS Messaging using sms-utils Package
      • Appendix
        • Bootstrap/U-Boot Recovery
        • CoreCDP File Paths
        • U-Boot Linux Utilities
      • References
      • Release Notes
        • CoreCDP 2.3.4 Release Notes
        • CoreCDP 2.3.3 Release Notes
        • CoreCDP 2.2.2 Release Notes
    • FaxFinder
      • Ruby Example Code
      • Python Example Code
      • Perl Example Code
      • Php Example Code
      • C# Example Code
      • C ++ Example Code
      • Java Example Code
      • Web Services API
        • Faxing APIs
          • Aborting a Fax Entry
          • Rescheduling a Fax Entry
          • Scheduling a Fax
        • User APIs
          • Viewing User Information
          • Verify User
          • Adding a User
          • Editing a User
        • Contact and Group APIs
          • Adding New Contacts
          • Viewing Contacts
          • Editing Contacts
          • Deleting Contacts
          • Viewing Groups
          • Editing Groups
          • Deleting Groups
          • Viewing Contact IDs
          • Viewing Group IDs
          • Creating a New Group
        • Cover Page API
          • Viewing Cover Pages
        • Fax Status APIs
          • Viewing Channel Status (FF240-IP only)
          • Viewing Modem Status (FF240, FF440, FF840)
          • Viewing Inbound Fax Status
          • Viewing Outbound Fax Status
          • Viewing Modem, Channel, System, Printer, and Share Status
        • Fax Log APIs
          • Viewing Inbound Fax Logs
          • Viewing Outbound Fax Logs
          • Viewing Call Log
          • Viewing Inbound or Outbound Log Count
        • FaxFinder Configuration APIs
          • Editing T38 Settings (FF240-IP only)
          • Viewing Inbound Routes
          • Deleting Inbound Routes
          • Editing Inbound Routes
          • Viewing Store and Forward (T.37) Settings
          • Editing Store and Forward (T.37) Settings
          • Viewing Modem Settings (FF240, FF440, or FF840)
          • Editing Modem Settings (FF240, FF440, or FF840)
          • Viewing SIP Settings (FF240-IP only)
          • Editing SIP Settings (FF240-IP only)
          • Viewing T38 Settings (FF240-IP only)
          • Viewing Add Global Contacts Status of Non-Admin Users
        • FaxFinder Information APIs and Elements
          • General Status Codes
          • Schedule Fax Element
          • Contact Element
          • Group Element
          • Viewing Information about the FaxFinder
          • Fax Entry Element
          • User Element
          • Inbound Routing Fax Element
      • T.37 Advanced Usage
    • iSMS
      • iSMS Send API
      • iSMS Receive API
      • iSMS Query API
      • iSMS & Nagios IT Management System
    • Powering Down Any -H5, -EV3, -C2, and -G3 Device
  • Downloads
  • RED Compliance
  • Forums
  • Source Code
  • MultiTech.com

Topic Tag: SMS

Home › Forums › Topic Tag: SMS

Viewing 8 topics - 1 through 8 (of 8 total)
    • Topic
    • Voices
    • Posts
    • Last Post
    • How can I delete SMS messages via the API?

      Started by: Brandon Gooch in: Conduit: AEP Model

    • 2
    • 2
    • 1 year, 7 months ago

      Mike McNeil

    • rCell 100 keeps forgetting users

      Started by: Dejan Rabic in: General

    • 1
    • 1
    • 7 years, 8 months ago

      Dejan Rabic

    • Using HTTP to delete an SMS message from the outbox

      Started by: David Tighe in: General

    • 1
    • 1
    • 8 years, 5 months ago

      David Tighe

    • iSMS SF800 Multi-Part Sms Messages

      Started by: Carel Rootman in: iSMS

    • 5
    • 15
    • 11 years, 8 months ago

      Bryon Davis

    • Problem with sms-utils and H5

      Started by: Philip Lombardi in: MultiConnect OCG

    • 2
    • 2
    • 11 years, 8 months ago

      Jesse Gilles

    • French characters sended as ?

      Started by: Noelia Soliz in: General

    • 2
    • 4
    • 11 years, 10 months ago

      Darrik Spaude

    • Add time stamp to SMS iSMS Server

      Started by: Kate Johnston in: iSMS

    • 2
    • 2
    • 13 years, 7 months ago

      Bryon Davis

    • Looking for MTCBA-G2-U paid developer to complete small SMS-only project.

      Started by: Jerry Gilels in: General

    • 1
    • 1
    • 14 years, 1 month ago

      Jerry Gilels

  •  

Viewing 8 topics - 1 through 8 (of 8 total)

User

  • Register
  • Log in

Sitemap

  • View all pages

Pages

  • Privacy Statement
  • Terms of Use
  • Sitemap
  • Search Results
  • Home
  • News
  • Products
  • Software
  • Downloads

Forums

  • Device HQ
  • General
  • Lora Network Server
  • mDot/xDot
  • Conduit: AEP Model
  • Conduit: mLinux Model
  • MultiConnect OCG
  • iSMS
RSS
  • Google
  • Youdao
  • Xian Guo
  • Zhua Xia
  • My Yahoo!
  • newsgator
  • Bloglines
  • iNezha
Top WordPress
Copyright © 2010-2025 Multi-Tech Systems, Inc. - Terms of Use - Privacy Statement - Sitemap
Based on theme by NeoEase. Valid XHTML 1.1 and CSS 3.