MTAC-ETH Power Draw
The following power draw values were measured with the MTAC-ETH card installed in a Conduit® device.
| Voltage | Typical Power – No Connection (Amps) | Typical Power w/Ethernet Cable Attached (Amps) | Max Power – Passing Data Stream (Amps) | Total Inrush Charge Duration During Power Up (mSec) | Total Inrush Charge in MilliCoulombs (mC) |
|---|---|---|---|---|---|
| 9.0 Volts | 0.330 | 0.634 | 0.636 | 8.74 | 4.43 |
| 20.0 Volts | 0.171 | 0.294 | 0.294 | 6.75 | 3.81 |
| 32.0 Volts | 0.119 | 0.200 | 0.201 | 24.7 | 4.18 |
Conduit Power Draw
If using a Conduit with the mCard™, factor your model’s power draw into your power calculations.
- MTCDT-246 Models Power Draw [the linked post is not published yet]
- MTCDT-247 Models Power Draw [the linked post is not published yet]
- MTCDT-210 Models Power Draw [the linked post is not published yet]